Difference between Pure Aluminum and Aluminum Alloy

1. Composition

  • Pure Aluminum: Aluminum content ≥99.0% (1000 series per national standard, e.g. 1050, 1060, 1070). It contains almost no other alloying elements, only trace impurities such as iron and silicon.
  • Aluminum Alloy: Based on aluminum, with intentionally added elements including magnesium, silicon, copper, zinc and manganese. Classified into:
    • Wrought aluminum: 2-series Al-Cu, 3-series Al-Mn, 4-series Al-Si, 5-series Al-Mg, 6-series Al-Mg-Si, 7-series Al-Zn-Mg-Cu
    • Cast aluminum: Die-cast aluminum (A380, ADC12, etc.), suitable for castings (aluminum die casting products you produce fall into this category)

2. Mechanical Properties (the most critical difference)

  • Pure Aluminum: Soft with low strength, excellent ductility, easy to bend and stamp. Low hardness, prone to scratches and deformation; not applicable for load-bearing structural parts. Advantage: Outstanding ductility.
  • Aluminum Alloy: Greatly improved strength and hardness. Some grades (e.g. 7075) reach strength close to steel. Ductility varies by grade; some are fit for forging & extrusion, others for die casting. Disadvantage: Moderate ductility, certain hard aluminum alloys become more brittle.

3. Corrosion Resistance

  • Pure Aluminum: A dense oxide film readily forms on its surface, offering good atmospheric corrosion resistance, but poor resistance to acid and alkali.
  • Aluminum Alloy:
    • 5-series and 6-series feature good corrosion resistance;
    • 2-series and 7-series contain copper, carrying higher risk of intergranular corrosion. Die-cast aluminum alloys (ADC12) contain silicon and iron, with weaker corrosion resistance than pure aluminum. Surface treatments (painting, anodizing) are normally required.

4. Thermal & Electrical Conductivity

  • Pure Aluminum: Superior thermal and electrical conductivity compared to most aluminum alloys, ideal for heat sinks and busbars.
  • Aluminum Alloy: Alloying elements reduce thermal and electrical conductivity. Strength is gained at the cost of reduced conductivity.

5. Machining & Forming

  • Pure Aluminum: Suitable for sheet deep drawing and soft stamping. Not fit for die casting due to poor melt fluidity.
  • Aluminum Alloy:
    • Cast aluminum alloy: Good melt fluidity for high-pressure die casting and gravity casting (motor housings, flanges, oil pans).
    • Wrought aluminum alloy: Suitable for extrusion, forging and CNC machining.

6. Surface Treatment

  • Pure Aluminum: Excellent anodizing performance with uniform oxide film.
  • Aluminum Alloy:
    • 6-series delivers great anodizing results;
    • High-silicon die-cast aluminum is difficult to achieve uniform bright anodized finish, usually finished by painting or impregnation.

7. Density & Weight

Their densities are very close: pure aluminum ≈2.70 g/cm³; most aluminum alloys range from 2.65~2.80 g/cm³. Weight difference is minimal. The main distinction lies in strength rather than weight.

8. Price

Under identical temper conditions, high-purity aluminum is more expensive than ordinary aluminum alloys. However, prices vary widely across different grades (7075 and premium cast aluminum also carry high costs).

Application Reference

✅ Pure Aluminum: Aluminum foil, busbars, soft aluminum gaskets, heat dissipation foils, decorative thin sheets ✅ Aluminum Alloy: Auto parts, motor housings, LED lamp housings, structural brackets, aerospace components, window & door profiles

Summary in One Sentence

Pure aluminum is elemental aluminum: soft, good electrical & thermal conductivity, low strength. Aluminum alloy is aluminum blended with alloying elements: high strength and hardness, castable for structural components, slightly lower thermal & electrical conductivity.